I really like the look of these recycled aluminum decks from the small US maker of Douglas, Gorgia – yes, they are made from recycled beer cans and other aluminum and plastic products. Very cool, and I am very tempted but suspect I would have to incur import tax and duty.
They do some nice custom/limited editions versions, including a stunning 38″ Punisher version.
They also make their own wheels in 70, 72, 73 and 76mm
Finally got to mount the H3 unit (this is an advance/pilot unit) to our 32″ custom made Hecs Deck. It took longer than I thought because I lost the remote, which has now thankfully turned up.
Fitting the unit was relatively easy; I used one 2.5mm riser pad and half of another to build up the gap the trucks had with my deck curving quickly away for the kick-tail.
Riser pads installe
Gap from the curve of the deck for the kick-tail
This is effectively a slightly smaller battery (2200mah) and single motor version of the H6 – it rides virtually the same, with nice progressive control, sharp braking (be careful) and the odd reverse button.
The Teamgee H3 finally arrived today – finally, once again UPS took their time and got the delivery wrong (why are you鸿运国际网址官网下载安装 so bad UPS?).
This is a low-cost unit (more on pricing to come, as this is not yet officially sold in Europe right now) – and for the record, I paid for this with my own money. Bit of information on it: 85 cm wheels, 2200mah battery, single hub-motor (left-side drive). Published specs: 12km range and 25 km top – not as far, or as quick, as the H6 (and certainly not a competitor to Mellow), but then it is significantly cheaper than the H6 and I suspect aimed at a different customer and market.
The motor unit (battery, truck and motor) comes with: screws for mounting, remote, charger, front truck and wheels and T-tool. The remote, pictured above, is the cheaper and simpler remote (compared to the H6 unit). Speed and Power switches on the side, the usual thumb-lever (with click4cruise) and the quirky shift button to reverse the board.
The plan was to temporarily fit this to our 32″ Hecs Decks custom Fish, even though it would cover a good part of the wood-burning artwork I did on the board, however, it really needs a riser pad for the trucks, so that the battery unit mounts flush to the deck.
Gap from the curve of the deck for the kick-tail
A bit of a pain to not have it immediately up and running, but easy to fix – riser pad on order… full review to come.
I had some idle time, and after ordering some new ones (Bones Hard Core) to try and spares, I thought: “what are the 10 things to know about bushings?”
So, to help, my 10 things to know…
They are important – a bushing is a simple polyurethane item, but with a really complex job to do (including keeping you鸿运国际网址官网下载安装 safe) balancing complex multi-directional forces. It is worth understanding how they work and getting the right ones for you鸿运国际网址官网下载安装.
Guides, not rules – there is no definitive rule here – use what works for you鸿运国际网址官网下载安装. Mix what you鸿运国际网址官网下载安装 want. There are some good guidelines on what to use for you鸿运国际网址官网下载安装r riding style, board, trucks, and weight, but they are just guidelines. They are relatively inexpensive, but impact so much – buy a few, buy some spares. Try different ones. Buy a bagful.
Different shapes – they come in different shapes (cones, barrels, stepped…) and construction (hard center, soft center…), which all work slightly differently depending on how you鸿运国际网址官网下载安装 want to ride. It is OK to mix shapes on the top and bottom side to tune how the board performs.
Different durometer – they come in different softness/hardness (rated in durometer or “duro”) which you鸿运国际网址官网下载安装 match to you鸿运国际网址官网下载安装r weight and riding style. It is OK to mix the duro on the top and bottom. There are plenty of guidelines for matching you鸿运国际网址官网下载安装r weight and style to the duro.
Different sizes – they come in different sizes (people often miss this): short, tall, fatter etc. Again it is OK to mix them and mixing is common; plus two that are tall can often not fit on the same kingpin.
Match the truck – Some (it is rare) trucks are different to all others and need to work with specifically designed bushings – just make sure you鸿运国际网址官网下载安装 don’t get mixed up.
Cup AND bushing – don’t think just “bushing”, think “cup/washer+bushing”. The cup/washer, that the bushing sits on, also impacts how the board performs. Match the size and shape of the cup/washer to the bushing size and shape.
Never cut to fit – never ever cut a bushing to make it fit. Cutting it will introduce micro cuts and tears which can sheer under pressure and leave you鸿运国际网址官网下载安装 in a whole world of pain. If it does not fit, change it or the cup/washer.
Replace? – if damaged, in any way – swap them out and throw away. Any damage can introduce a fault line which can then sheer under pressure. As said, they are inexpensive – just change.
Good ones? – Yes, good ones are worth paying for – they are not “all just some plastic”. The formulas are different and how they perform can be very different – surprisingly so. Bad ones also run the increased risk of sheering. Even the best, however, are relatively inexpensive, so it is worth paying for the good ones from trusted brands like Venom, Riptide, BloodO, Oust, Orangatang, Shorty etc. if not sure, trust you鸿运国际网址官网下载安装r local skate shop.
Note, virtually all boards/trucks come with stock cheap bushings, set up for whatever they consider is the ‘average customer’ weight and riding style. I would recommend always changing to what works for you鸿运国际网址官网下载安装 – you鸿运国际网址官网下载安装r weight and riding style. The Paris ones that came with their trucks I like, but some of the cheap ones used on e-boards are poor and I would replace straight away.
Regarding e-boards, there is not much difference between a conventional longboard and an e-board in terms of bushings. The trucks are generally the same. Most people just set-up their e-boards as a downhill longboard, for greater stability at speed, using stiff (high duro) barrel+barrel – but you鸿运国际网址官网下载安装 can do what you鸿运国际网址官网下载安装 want and run them differently if you鸿运国际网址官网下载安装 want greater carving etc.
And finally, note that there is a small optimum range for the tightness or looseness of the kingpin nut. Too tight and you鸿运国际网址官网下载安装 will deform the bushing and it will perform worse or, worse, sheer. Don’t over tighten to change the performance (or help reduce speed wobble), change the bushing.
A great thread on Electric Skateboard Builders on setting up bushings:
Being an old-time (or older-timer!) longboard fan, I am a sucker for a retro pintail (owning two conventional pintails already); so I was immediately interested when I saw ’s new stylish electric ‘stealth’ pintail announced, with its hub-motors, hidden in-board battery and twin-stripe grip-tape.
Having talked to the company (thumbs up for their initial responsiveness) about importing one, a nice new one is now heading our way (at my cost) to join the stable. I will post comments and a review, once it is here and we have taken it out a few times.
UPDATE: Here is a to a good video Ronnie Sarmiento did on the Teamgee board.
Sadly it looks like has stopped making e-boards (although I have found no official statement). They are still making their other products, drones etc., it seems that they have just stopped selling their e-boards. I say “sad” as we have had one of the first-gen boards and it is still going strong, it has been bomb-proof, and now used very happily by my 8-year-old.
Its single belt-motor is now a little slow compared to most current modern 20mph+ boards, but now perfect for my you鸿运国际网址官网下载安装ngest getting used to real e-boards (and not toys). It has excellent real 90cm wheels, a progressive remote control, and a nice flexing deck; plus, as said, ours has had great reliability and with minimal battery age sag after 2 years!
You can still buy them from some independent retailers, some of them now significantly discounting them, however, I imagine getting support and things fixed will not be so easy going forward unless you鸿运国际网址官网下载安装 can pick up cheap salvage units to strip for the parts.
I can understand why they stopped, it is still a niche market that is overcrowded with options and now a flood of budget hub-motor boards, some of them really good. Tough competition and not really the market demand to scale up manufacturing and make a good profit – the same reason most of the crowd-funded struggle and sadly will disappear.
Virtually all of the budget boards are now hub-motors; not my favorite technology for our crappy old victorian pavements, but they are significantly cheaper to make than belt-drives – just basically fewer parts and assembly. Hence, it was good to see and launch recently belt and gear-drive options, I hope they do well and make it to some form of sustainable scale.
Sad to see the E-Go be no more. Been great; thanks, Yuneec for the excellent work and all the fun.
I have just found a new European maker, , based out of Barcelona. Interestingly they produce both complete e-boards and units to convert existing decks. Three models, of conversion units, are available (pre-order for spring 2018 right now): a “Solo” single hub-motor and battery unit, single hub-motor but double battery “Cruiser” unit, and a double battery and hub-motor “R” unit.
The Solo and Cruiser units, with the single motor, looks on paper low-power rated with a max of 840W. The faster R unit, with the double motor, has a more respectable max 1680W, but still not matching the top performing units on the market. In the end, however, only real-world riding will tell how they perform and what is fast enough or not.
What is interesting, besides general design including replaceable hub-motor polyurethane, is that they are specifying IP65 dust and water-resistance (rated as: “dust tight and protected against water projected from a nozzle“), like the similar focused Mellow and Onan units.
Vlogger FabTrav (Fabian Doerig) trying a unit out at the ISPO 2018 Exhibition:
The very well regarded, and competitively priced, v1.5 hub-motor e-board is now priced with shipping and import tax (duty and VAT) to the EU, as well as the US. This is great news as not only is it a good spec board for less than lb500 (I have tested the v1 and v1.5 looks even better), but their customer support is very well regarded and, importantly, you鸿运国际网址官网下载安装 can purchase individual components or it all as a kit. This makes fixing issues, although from China, much easier than other similar lb500 options.
Cost (at time of writing) is lb302.52 for the std battery and lb446.92 for the more powerful Sanyo model. Cost is the same for either the short 30″ or my preference, the longer 38″.
I found another small European maker, the French company , with some nice looking downhill boards and some very stylish wheels. I will have a look more at the wheels and am very tempted. Never been one for white wheels, but these are the first that got my attention.