I have been enjoying the H3 on the 32″ Hecs deck, more than I expected and, apart from testing the Boosted with the new big Boa wheels (see the previous post), it is all I have used in the last month.
What makes it fun is the combination of short deck, silent easy push hub-motor, and smooth power controls. The cheap H3 remote is a little too sensitive for my liking, especially on braking, but liveable with. In the end, I picked up another H6 remote and paired that with the H3. The H6 remote is a significant improvement and, given it is relatively inexpensive I highly recommend upgrading to it. The wheel control on the H6 is just better and more progressive than the thumb lever on the H6; breaking is just more controlled and IMO safer.
I love the BB with its flexy deck, belt drive and soft wheels for going anywhere, and not worrying too much about bad roads and pavements, but for quick hooning around on nice roads and pavements, nipping to the shop, the short deck and H3 combination is great and always makes me smile as I find myself carving like salmon heading upstream, way more than I can do on the BB.
Before the good points, lets get the negatives out of the way:
The H3 remote control is basic and cheap (get the H6 remote) and has a potentially dangerous forward/reverse button prominent on the remote (the H6 is less prominent and less prone to accidental pressing).
The single motor top-speed is not powerful enough, it accelerates OK and tops out around 15mpg, but the big issue is that it really struggles to get up steep hills and cannot even sustain its average speed on moderate ones.
The good points:
It is inexpensive.
It is well made (for the cost) and uses the well-made trucks from the H6.
The power control is smooth and progressive; an easy e-skate to get confident on quickly. No disconnects or connection issues.
It is easy to fit (see link).
There is minimal resistance (this is just a single hub-motor), so pushing off, using it like a conventional longboard is easy, you鸿运国际网址官网下载安装 can even pump it if you鸿运国际网址官网下载安装 want.
In summary: easy to fit, just works, but struggles with hills.
The range I have been getting from the 2200mah battery is just over 6 miles when out easy cruising and occasionally hitting the 15mph top speed (for the record I am 185lb/84kg). Charging time from empty is roughly 1.5 hours.
Like the H6, the H3 remote has a hard-switch two-setting speed limiter which works well with my 8-year-old and restricting his top speed.
Regarding the price, my unit is an advanced one (paid for with my own money) but Teamgee has not put this up for general sale, so I don’t know the official cost. If it was me, looking at the alternatives, I would happily pay $250-300 for this unit.
Final word, I have ordered an exotic 31″ carbon-fiber deck (19″/48cm wheelbase) for it to live on longer term. If Teamgee bring out a more powerful drive version, I will get it.
Nice one Teamgee.
(just redesign you鸿运国际网址官网下载安装r remote and that forward/reverse button and stick a more powerful motor on it).
Finally got to mount the H3 unit (this is an advance/pilot unit) to our 32″ custom made Hecs Deck. It took longer than I thought because I lost the remote, which has now thankfully turned up.
Fitting the unit was relatively easy; I used one 2.5mm riser pad and half of another to build up the gap the trucks had with my deck curving quickly away for the kick-tail.
Riser pads installe
Gap from the curve of the deck for the kick-tail
This is effectively a slightly smaller battery (2200mah) and single motor version of the H6 – it rides virtually the same, with nice progressive control, sharp braking (be careful) and the odd reverse button.
Hector of Hecs Deck is moving workshop and has two interesting 40″ custom ‘last out of the workshop’ decks for sale, both in interesting blue tinted wood. One a fish scales, similar to one I already have which is a really interesting wood pattern. If you鸿运国际网址官网下载安装 are interested contact at hector鸿运国际网址官网下载安装@hecsdecks.co.uk.
The Teamgee H3 finally arrived today – finally, once again UPS took their time and got the delivery wrong (why are you鸿运国际网址官网下载安装 so bad UPS?).
This is a low-cost unit (more on pricing to come, as this is not yet officially sold in Europe right now) – and for the record, I paid for this with my own money. Bit of information on it: 85 cm wheels, 2200mah battery, single hub-motor (left-side drive). Published specs: 12km range and 25 km top – not as far, or as quick, as the H6 (and certainly not a competitor to Mellow), but then it is significantly cheaper than the H6 and I suspect aimed at a different customer and market.
The motor unit (battery, truck and motor) comes with: screws for mounting, remote, charger, front truck and wheels and T-tool. The remote, pictured above, is the cheaper and simpler remote (compared to the H6 unit). Speed and Power switches on the side, the usual thumb-lever (with click4cruise) and the quirky shift button to reverse the board.
The plan was to temporarily fit this to our 32″ Hecs Decks custom Fish, even though it would cover a good part of the wood-burning artwork I did on the board, however, it really needs a riser pad for the trucks, so that the battery unit mounts flush to the deck.
Gap from the curve of the deck for the kick-tail
A bit of a pain to not have it immediately up and running, but easy to fix – riser pad on order… full review to come.
Finally got the family stable together: six Europans and a Canadian.
From left to right:
Hecs Decks Fish (Gullwing+Metro Express)
Kaliber Wild Africa Affe (Paris V2 trucks+Orangatang Kegel wheels)
Jungle Pintail (Paris Adam Colton trucks +Blood Orange Liam Morgan wheels)
Hecs Decks King Louis (Paris V2 trucks +Metro Motion wheels)
The beautiful walnut Balance will get wrapped up for winter (summer, no grip board), along with the Afee (gets a break and donates the Kegels), King Louis and Jungle Pintail (another cafe posing only). The Hecs Fish stays out (as always, it is the easiest to transport), the beautiful cherry and carbon-fiber Zenit AB is getting re-gripped, and gets the Kegels for a change, and the Curfboard needs more practice and experimentation.
Our dancer (well a board to do some fancy footwork on) named King Louis, a custom-made from the ever excellent , is now up and running with the addition of the Blood Orange 70cm Liam Morgan 82a wheels – new wheels to us, so interesting to see how they perform.
Hecs Decks King Louis
Wheelbase: 59cm Length: 100cm (39”)
Beautiful top and bottom veneer, a blue-tinted fish-scale patterned wood.
After ripping the (hated) clear grip-tape off the Hec’s Fish, I got up early with an idea and found our Christmas cookie-cutters, including a star-shaped one. I am actually pleased with how it all turned out, given it was an early morning JFDI – plenty of practical grip and it still shows off the wood and my tree design.
The cookie-cutter was not sharp enough to go through cleanly the grip-tape, but it was easy enough to make an indent and then cut the shapes out. The tricky bit is then measuring out lines and putting the shapes in a regular pattern.
Put on some new slightly shorter 9″ Gullwing trucks on the Hecs Fish, alongside my favourite cruising wheels, Hawg Mini Monsters, and Oust Moc7 bearings. Shorter, for purely aesthetic reasons, given the deck is slightly narrower. The 50o Gullwings are well made and feel very similar to my usual Paris V2s.
The standard Gullwing bushings (90a) were too soft for my liking, so am trying out some Mindless 94a barrels (the blue ones) matched with some Bones Medium 91a hardcore cones (white/yellow).
So I decided to try my hand at wood burning patterns, using an electric wood burner/engraver and am really pleased with how it, the tree, turned out – the “HD” was already there, I added the tree,
I used a basic stencil for the outline of the tree, matching the starting trunk width with the HD logo, and one of the leaf-shaped wood burner bits to do the leafs.
The deck was then covered with clear grip-tape; which, although sold as ‘clear’ is really just opaque and lessens the impact of the burnt wood design. Less than ideal, but the small board needs grip, especially when it is wet out. Sometimes sacrifices have to be made for practicality.
UPDATE 29/10/17: I hated the clear grip so much, I have taken it back off. It showed up foot dirt, and gave very little benefit in terms of showing the wood and pattern, that it seemed pointless. The board needs grip, so will think of a creative way to use black grip, without hiding completely the design.
Not particularly hard, but worth taking the time over as there is no erasing option.