the king-pin is restrcited from dropping down due to the motor-cables.
holes punched through the gip-tape to access the truck bolt heads
I made a number of changes to the Teamgee H3 and H6 e-skates. First off was new bushings on both boards – a mixture of Venom SHR 91a barrels and Thunder 90a cones. The stock Teamgee bushings are the usual cheap budget bushings and not great on quick and progressive rebound. Changing the H3 bushings is straightforward, but the rear board-side bushings on the H6 is a little tricky to swap-out. On the rear of the H6, the hub-motor cables limit’s the movement of the hanger and how far down the kingpin nut can drop, so that the board-side bushing cannot be removed.
The only way to move the hanger enough to remove the board-side bushing is to unfasten the truck baseplate, but this requires an allen-key turning the heads of the truck bolts, which can only be done by punching a hole through the grip-tape, so not great if you鸿运国际网址官网下载安装 want a perfect grip-tape look.
In addition, I picked up another H6 controller and paired that with the H3. The basic H3 controller is OK, but the H6 wheel has a nicer movement and feel in the hand.
The H3 remote controller (let) and the H6 one (right) that has replaced it.
Finally, replacement polyurethane wraps for the hub-motors arrived – not needed right now, the current ones are lasting OK, but just forward thinking and a bit of fun to put red on the H6 motots.
Comparison of how thin even a 90mm hub-motor wrap is, compared to a standard wheel – it is not hard to understand why there is more vibration from hub-motor boars.
I really like our Teamgee H6 and H3, but both remotes have a feature that has now caused me to spill twice (thankfully only minor grazes).
Both the H6 and H3 remotes have a ‘SHIFT’ button for switching between forward & reverse. If this button is accidentally/unknowingly pressed and you鸿运国际网址官网下载安装 just push off (I always push off instinctively, being a long-time border) and then bring in the power to continue riding, when the button has been pressed into reverse, the board shoots backward and you鸿运国际网址官网下载安装 fly off.
This happened once when the remote had been in my pocket and another time when my 8-year-old thought it would be a laugh to give the board back to me in reverse (lesson learned). I now ALWAYS test the direction of the board first before setting off, which I recommend others do.
I have passed my comment on to Teamgee and, as usual, they responded quickly (I have found them very good to communicate with), and said they will look into the design.
As said, I really like the boards and would happily buy another – it is just if you鸿运国际网址官网下载安装 have a current model, or an H9 on order, check before setting off (especially if you鸿运国际网址官网下载安装 have an 8-year-old with an evil sense of humor!).